|
Analog to SDI Converter Model SDI-3
|
 |
Description  - PDF Spec Sheet
Xintekvideo's Analog to SDI Converter Model SDI-3 is the ideal bridge between analog color video signals and SDI.
The Model SDI-3 accepts a NTSC or PAL composite analog video signal and it outputs a serial digital video at 270 Mbs, with full 10-bit quantizing accuracy.
The Model SDI-3 is highly shielded to prevent EMI problems common with other converters. It comes in a small tightly sealed box (about 5" x 2.5" x 1.25") which can be dropped anywhere in your plant without the danger of radiation and interference to other equipment.
The Model SDI-3 is such a high performance and yet such a low priced converter that it becomes cost effective to use a dedicated unit fo each analog video feed in the digital plant.
|
|
| Specifications: |
| Input: |
Analog Composite video signal 1v pp into 75 Ohms. |
| Outputs: |
2 serial digital video outputs at 270 Mbs. Impedance: 75 Ohms. |
| Frequency Response of Analog Video |
± 1 dB to 6.5 MHz |
| Quantizing Accuracy: |
10-bit |
| Non Linearity |
< 1% |
| Differential Gain |
< 1% |
| Differential Phase |
< 1º |
| K Factor with 2T Pulse |
Better than 1% |
| Power Requirement: |
6-9v DC, 450ma |
| Environmental: |
| Temperature: |
32º F to 110º F, Ambient |
| Humidity: |
10% to 90% non-condensing |
| Mechanical: |
| Case |
5" x 2.5" x 1.25" |
| Separate plug-in power transformer |
2.75" x 2" x 1.75" (approximately) |
| Power Requirement of Transformer: |
115 volts AC, 60 Hz, 6 Watts |
| Specification subject to change without notice. |
